ZyXEL Communications Food Warmer vantage access Manuel D’Utilisation
Chapter 15 WAN Device
Vantage Access User’s Guide
182
The following table describes the labels in this screen. Refer to
for
other field descriptions.
15.9.1 WAN DSL Link Configuration
Use the WANDSLLinkConfig screen to set the ATM layer properties for the physical DSL
connection.
connection.
1 Select a registered device in the Device List window and click Configuration >
InternetGatewayDevice > WANDevice.
2 Click a number and WANConnectionDevice.
3 Cick a number and WANDSLLinkConfig to display the screen as shown.
3 Cick a number and WANDSLLinkConfig to display the screen as shown.
Figure 117 TR-069: WAN Device: WANDSLLinkConfig
The following table describes the labels in this screen. Refer to
for
other field descriptions.
Table 55 TR-069: WAN Device: WANConnectionDevice: Details
PARAMETER NAME
VALUE
WANIPConnectionNumberOf
Entries
Entries
This field displays the number of WANIPConnection entries
associated to the WANConnectionDevice.
associated to the WANConnectionDevice.
WANPPPConnectionNumber
OfEntries
OfEntries
This field displays the number of WANPPPConnection entries
associated to the WANConnectionDevice.
associated to the WANConnectionDevice.
Table 56 TR-069: WAN Device: WANDSLLinkConfig
PARAMETER NAME
VALUE
Enable
This field displays 1 to indicate that the DSL link is active; otherwise, this
field displays 0.
field displays 0.
LinkStatus
This field displays the link status (Up, Down, Initializing or Unavailable).