ZyXEL Communications Food Warmer vantage access Manuel D’Utilisation

Chapter 17 LAN Device

Vantage Access User’s Guide

The following table describes the fields in this screen. Refer to 

 for 

other field descriptions.  

The Stats screen shows the statistics on the LAN interface. 

1 Select a registered device in the Device List window and click Data Model > 

InternetGatewayDevice > LANDevice. 

2 Click a number and LANEthernetInterfaceConfig. 
3 Click a number and Stats. 

Figure 171   TR-098: LAN Device: LANEthernetInterfaceConfig: Stats 

The following table describes the fields in this screen. Refer to 

 for 

other field descriptions.  

Table 89   TR-098: LAN Device: LANEthernetInterfaceConfig: Details 

Enable

This field displays 1 to indicate that the LAN Ethernet interface is active. 
0 indicates the LAN Ethernet interface is disabled. In this case, no connection is 
allowed. 

Status

This field displays the connection status of the Ethernet interface. 

MACAddress

This field displays the MAC address of the Ethernet interface. 

MACAddress
ControlEnable
d

This field displays 1 to indicate that traffic with the specified MAC addresses is 
allowed on this port. You can specify the MAC addresses in the 

 screen (refer to 

). 

This field displays 0 to indicate that MAC address control is disabled. All traffic is 
allowed through the LAN interface. 

MaxBitRate

This field displays the connection speed in megabits per second (Mbps). 
Auto (auto-negotiation) allows the port to negotiate with a peer port automatically to 
obtain the connection speed that both ends support.

DuplexMode

This field displays the duplex mode for the connection. 
Auto allows the port to negotiate with a peer port automatically to obtain the duplex 
mode that both ends support.

Table 90   TR-098: LAN Device: LANEthernetInterfaceConfig: Stats 

BytesSent

This field displays the number of transmitted bytes on this interface.

BytesReceive
d

This field displays the number of received bytes on this interface.