ZyXEL Communications Food Warmer vantage access Manuel D’Utilisation

 Chapter 18 WAN Device

Vantage Access User’s Guide

You can set the Ethernet settings on the WAN interface in the WANEthernetInterfaceConfig 
screen. 

Select a registered device in the Device List window and click Data Model > 
InternetGatewayDevice > WANDevice. Click a number and WANEthernetInterfaceConfig 
to display the screen. 

Figure 193   TR-098: WAN Device: WANEthernetInterfaceConfig 

The following table describes the labels in this screen. Refer to 

 for 

other field descriptions. 

View the statistics for the WAN interface in the Stats screen. 

ErroredSecs

This field displays the number of Errored Seconds. 

SeverelyErroredSecs

This field displays the number of Severely Errored Seconds. 

FECErrors

This field displays the number of FEC errors. 

ATUCFECErrors

This field displays the number of FEC errors detected by the ATU-C.

HECErrors

This field displays the number of HEC errors.

ATUCHECErrors

This field displays the number of HEC errors detected by the ATU-C.

CRCErrors

This field displays the number of CRC errors.

ATUCCRCErrors

This field displays the number of CRC errors detected by the ATU-C.

Table 100   TR-098: WAN Device: WANDSLInterfaceConfig: Stats (Total) (continued)

Table 101   TR-098: WAN Device: WANEthernetInterfaceConfig 

Enable

This field displays 1 to indicate that this interface is active; otherwise, it displays 0.  

Status

This field displays the status of this interface. 

MACAddress

This field displays the MAC address of the interface. 

MaxBitRate

This field displays the maximum link speed (10, 100 or Auto) on the interface. 

DuplexMode

This field displays the duplex mode (Half, Full or Auto) for the interface.