ZyXEL Communications Food Warmer vantage access Manuel D’Utilisation
Chapter 21 WAN Device
Vantage Access User’s Guide
340
21.10 WAN ATM F5 Loopback Diagnostics
Use the WANATMF5LoopbackDiagnostics
screen to view loopback diagnostic (ping) test
results and to configure timeout settings for the ping test on the ATM layer.
1 Select a registered device in the Device List window and click Data Model >
InternetGatewayDevice > WANDevice.
2 Click a number and WANConnectionDevice.
3 Click a number and WANATMF5LoopbackDiagnostics to display the screen as shown.
3 Click a number and WANATMF5LoopbackDiagnostics to display the screen as shown.
Figure 288 TR-098 Amendment 1: WAN Device: WANATMF5LoopbackDiagnostics
The following table describes the labels in this screen. Refer to
for
other field descriptions.
ATMCRCErrors
This field displays the number of ATM layer cyclic redundancy check errors.
ATMHECErrors
This field displays the number of Header Error Check related errors at the
ATM layer.
ATM layer.
Table 157 TR-098 Amendment 1: WAN Device: WANDSLLinkConfig (continued)
PARAMETER NAME
VALUE
Table 158 TR-098 Amendment 1: WAN Device: WANATMF5LoopbackDiagnostics
PARAMETER NAME
VALUE
DiagnosticsState
This field displays the availability of the ping test result. Requested means
a test is to be initiated.
a test is to be initiated.
NumberOfRepetitions
This field displays the number of ping tests (between 1 and 4294967295) to
perform before displaying the test results.
perform before displaying the test results.
Timeout
This field displays the timeout (between 1 and 4294967295 milliseconds)
for the ping test.
for the ping test.
SuccessCount
This field displays the number of pings that received a successful response
within the timeout in the most recent ping test.
within the timeout in the most recent ping test.
FailureCount
This field displays the number of pings that failed to receive a successful
response within the timeout in the most recent ping test.
response within the timeout in the most recent ping test.
AverageResponseTime
This field displays the average response time (in milliseconds) of all pings
that received a successful response in the most recent ping test.
If there is no successful response from the ping test, this field displays zero.
that received a successful response in the most recent ping test.
If there is no successful response from the ping test, this field displays zero.