Znyx Networks bh5700 Manuel D’Utilisation
zconfig
NAME
zconfig - Configures the OpenArchitect switch.
SYNOPSIS
zconfig [-h <host_name>] [-d <level>] [-a] [-t] [{-f <file>} |
<configuration>]
<configuration>]
DESCRIPTION
zconfig creates VLAN groups of switch ports or trunks. Each VLAN group forms a Layer 2
switching domain. Each VLAN group has a VLAN Identification number (VID) that can be
carried in a tag field, located in the header of packets traveling on that VLAN. The configuration
of a port determines whether a packet transmitted from that port includes the VLAN tag. A set of
up to eight ports may be configured as a trunk, with all links from these ports connect to the same
link partner. For each VLAN group created by zconfig, a network interface is also created.
After the network interface is started by ifconfig(1M), the VLAN group performs Layer 2
switching. The network interface can be used for Layer 3 routing between VLAN groups.
switching domain. Each VLAN group has a VLAN Identification number (VID) that can be
carried in a tag field, located in the header of packets traveling on that VLAN. The configuration
of a port determines whether a packet transmitted from that port includes the VLAN tag. A set of
up to eight ports may be configured as a trunk, with all links from these ports connect to the same
link partner. For each VLAN group created by zconfig, a network interface is also created.
After the network interface is started by ifconfig(1M), the VLAN group performs Layer 2
switching. The network interface can be used for Layer 3 routing between VLAN groups.
A network interface uses the following format:
zhpN (for example, zhp0)
N-is an integer between 0 and 9999. The value of N is not required to be the same as any of the
port(s) that are its members. The range 0-4999 is reserved for network interfaces created by users.
The range 5000-9999 is reserved for network interfaces created by switch applications.
port(s) that are its members. The range 0-4999 is reserved for network interfaces created by users.
The range 5000-9999 is reserved for network interfaces created by switch applications.
A trunk uses the format zrlK, where K is an integer between 0 and 31, though only 24 ports
actually may be used on the base board.
actually may be used on the base board.
OPTIONS
-h <hostname>
Specifies the hostname to configure. By default,
zconfig configures the local OpenArchitect switch.
-d <level> Sets the level of debugging output produced by
zconfig. The default level is 1. Setting the debug level higher
zconfig. The default level is 1. Setting the debug level higher
produces more output. The maximum output level is currently
four (4).
four (4).
-a
Displays the current configuration of the switch.
-t
Tears down the entire switch configuration.
{-f <file>} | <configuration>
Gets configuration information from the specified file. A <file>
name of ‘+’ reads configuration data from standard input. If the
name of ‘+’ reads configuration data from standard input. If the
-f flag is not used, a single line of configuration data can be
Ethernet Switch Blade User's Guide
release 3.2.2j
page 274