VXi Computer Hardware VX1410A Manuel D’Utilisation

STATus Subsystem

VX1410A & VX1420A IntelliFrame Mainframe Instruction Manual

Sets or queries the power supply positive transition filter.

You can only set or clear bits 3 and 4 of the transition filter. Setting a bit enables
the corresponding power supply condition to propagate to the event system. Any
failures will display on the front panel readout. If you disable the bits, any failure
in the corresponding power supply will not be reported to the front panel readout
or to the event system.

Bits 0 – 2 and bits 5 – 8 of the transition filter are always enabled. Bit 15 always
returns a 0. The factory default setting is 32743. The +5 V Standby and +5 V
External are not monitored.

STATus:QUEStionable:VOLTage:PTR <Mask>

STATus:QUEStionable:VOLTage:PTR?

{<NRf> | <Nondecimal Numeric>}
0 

≤

 N 

≤

 #HFFFF

<NR1>

D3

+5 V Standby

D4

+5 V External

0

–222, “Data Out of Range”
You attempted to set the transition filter to an illegal value.

None

Command:

STAT:QUES:VOLT:PTR #H7FF7

Query:

STAT:QUES:VOLT:PTR?

Response:

32759

STATus:QUEStionable:VOLTage:CONDition?