VTech Amplified Phone I 5881 Mode D’Emploi
8
Registration
Registering an i 5801 Handset for the first time
After charging, the screen will display:
Find the BASE ID Code by doing the following (Base must
be OFF):
be OFF):
1)
At the Base, press MENU.
2)
Scroll down to DISPLAY BASE-ID, then press OK.
3)
Enter the 15-digit Base ID Code into the Handset. If you make a
mistake, move the joystick to the left (
mistake, move the joystick to the left (
) to backpace or press the
right softkey
to erase a character.
4)
Press OK to complete the registration process.
NOTE: If the Handset, after charging, says “Searching for Base...”, press the
NEW soft key. “Enter Base ID” will now be displayed. Follow the steps above.
NEW soft key. “Enter Base ID” will now be displayed. Follow the steps above.
Wait approximately 15-60 seconds. You will hear confirmation beeps from the
Base and Handset. The newly registered Handset will now be assigned the
lowest extension number not previously assigned to a different system Handset
(1 - 6).
Base and Handset. The newly registered Handset will now be assigned the
lowest extension number not previously assigned to a different system Handset
(1 - 6).
If you do not enter the correct digit sequence, you will see “ Invalid Base ID!” and
hear an error tone. move the joystick to the left (
hear an error tone. move the joystick to the left (
) to backpace or press
the right softkey
to erase a character, and carefully re-enter the Base
ID Code.
NOTE: The 15-digit BASE ID Code may contain numbers and characters,
such as *. Make sure you carefully enter all 15 digits.
such as *. Make sure you carefully enter all 15 digits.
Register
Getting S
tarted