VIZIO VBR334 Manuel D’Utilisation

33

VBR334

Setting Up a Wireless Connection Using WPS (PIN-Only)
Many newer routers feature WiFi Protected Setup, which allows you to setup a 
wireless network without manually entering connection information. Follow the 
instructions in this section if your WPS-enabled router does not have a WPS 
button.

To set up a wireless connection using a WPS PIN:

1.  From the Network Menu, use the 

Arrow buttons on the remote to 
highlight 

Wireless and press SELECT. 

 
The Wireless menu is displayed. 
 
 

2.  Use the 

Arrow buttons on the remote 

to highlight 

Network List and press 

SELECT. 
 
A list of available wireless networks is 
displayed. 
 

3.  Use the 

Arrow buttons on the 

remote to highlight the name of your 
WPS-enabled wireless network, then 
press 

SELECT. 

 
 
 

4.  Use the 

Arrow buttons to highlight 

WPS Pin and press SELECT.

5.  Use the 

Number Pad on the remote 

to enter your WPS Pin (usually found 
on the back of your router), then press 
SELECT. 
 
 
 

Using the Wireless Network List
The Wireless Network List uses a series of symbols to give you all the information 
you need at a glance. Use the table below to familiarize yourself with these 
symbols:

Category

Icon

Definition

Connection

Displayed when the player is connected to

the associated network.

Saved

Displayed when the network properties,

including password, have been saved in

the player’s memory.

Security

Indicates whether the associated network

is encrypted or not. If the “Locked” symbol

is overlaid with a red cross, it means the

encryption type is unsupported by the

player.

Protocol

Indicates the network protocols supported

by the associated network.

Signal Strength

Indicates the signal strength of the

associated network. The more green bars,

the better the network strength.