VistaQuest N7227V5 Manuel D’Utilisation
– 66 –
TABLE OF CONTACT ID EVENT CODES
Code
Definition
110
Fire Alarm
121
Duress
122
Alarm, 24-hour Silent
123
Alarm, 24-hour Audible Panic
131
Alarm, Perimeter, Burg.
132
Alarm, Interior, Burg.
134
Alarm, Entry/Exit, Burg.
135
Alarm, Day/Night, Burg.
150
Alarm, 24 Hour Auxiliary
301
AC Power
302
Low System Battery/Battery Test Fail
333
Expansion Module Fail
353
Long Range Radio Trouble
373
Fire Loop Trouble
Code
Definition
374
Exit Error Alarm
380
Trouble (Global)
383
RF Sensor Tamper
384
RF Sensor Low Battery
401
O/C by User
406
Cancel by User
407
Remote Arm/Disarm (Download)
408
Quick Arm AWAY/MAX
441
Armed STAY/INSTANT, Quick Arm
STAY/INSTANT
STAY/INSTANT
570
Bypass
601
Test, Manually Triggered
602
Periodic Test
606
AAV to follow
Communication Programming
Introduction
This section provides instructions for programming those fields that affect communications
between the control and the central station.
This section provides instructions for programming those fields that affect communications
between the control and the central station.
Programming Procedure
1. With at least one Alpha keypad (5137AD or 6139) connected to the
system, power up the system. If necessary, refer to the FINAL
POWER
UP section for the power-up procedure. If you had previously connected
the AC transformer to the control panel, you need only plug in the
transformer (to 120VAC outlet) to power up the system.
the AC transformer to the control panel, you need only plug in the
transformer (to 120VAC outlet) to power up the system.
2. Enter the programming mode by keying the following on the Alpha
keypad: Installer code (4 1 1 1) + 8 + 0.
Fields
✱
40,
✱
41,
✱
42:
Enter up to the number
of digits shown. Do not
fill unused spaces.
of digits shown. Do not
fill unused spaces.
Enter 0–9,
# + 11 for ‘
✱
’
# + 12 for ‘#’
# + 13 for a pause
(2 secs)
Press
✱
40
PABX ACCESS CODE
Enter up to 4 digits if PABX is needed to access an outside line. If fewer than
4 digits are needed to be entered, exit by pressing [
4 digits are needed to be entered, exit by pressing [
✱
] and next field number
(e.g., 41). To clear entries from field, press
✱
40
✱
.
Press
✱
41
PRIMARY PHONE No .
Enter up to 12 digits. If fewer than 12 digits entered, exit by pressing [
✱
]
and
next field number (e.g., 42). To clear entries from field, press
✱
41
✱
.
Press
✱
42
SECONDARY PHONE No.
Enter up to 12 digits. If fewer than 12 digits entered, exit by pressing [
✱
]
and
next field number (e.g., 43). To clear entries from field, press
✱
42
✱
.
If using
the Paging feature, enter the pager number as the secondary phone
number.
number.
Press
✱
43 SUBSCRIBER ACCOUNT. No.
Field
✱
43 is also
used as the Long
Range Radio
Subscriber Account
Number
Range Radio
Subscriber Account
Number
Central Station Account Number).
Enter 0–9; # + 11 for B; # + 12 for C; # + 13 for D; # + 14 for E; # + 15 for F
(default).
Enter
Enter 0–9; # + 11 for B; # + 12 for C; # + 13 for D; # + 14 for E; # + 15 for F
(default).
Enter
✱
as the fourth digit if a 3-digit account number (for 3+1 dialer reporting
format) is used. Enter 0 as the first digit of a 4-digit account number for Nos.
0000–0999. End field by pressing
0000–0999. End field by pressing
✱
(and press next field).
See the blank Programming Form in the separate Programming Guide for
examples of Account No. entries.
examples of Account No. entries.