Viper Color OLED 2_Way Manuel Du Propriétaire

51

© 2013 Directed. All rights reserved.

1-W

ay

* See 

 for more details . 

Programming

To enter; hold the

button for 8 seconds, the remote emits one long 

beep and turns the LED on, the programming main menu has been 
accessed. 
To exit; press and release the

button to go back and repeat to exit. 

1 short and 1 long beep is emitted for each step back, the LED turns 
off when programming is exited.

Sensor Adjust
To avoid unintended alarm triggers, it is recommenced that an 
authorized Directed dealer perform all sensor adjustments.

Remote Features menu
Press and release the

button, 2 LED flashes and beeps indi-

cate the remote features menu is accessed and can be set. Press 
buttons indicated below, 1beep and flash turns the feature on, 2 
beeps and flashes turns the feature off.
•  Autolock feature: Press 

 to turn on/off.

•  Remote Beeps: Press 

 to turn on/off.

•  Car 2 feature: Press 

 to turn on/off.

Remote Learning 
Press the

button,3 LED flashes and beeps indicates the remote 

is ready to program to the system.
Per the instruction in the Remote Pair section of this guide, follow-
ing step 4 of Placing the system into the remote pair mode. Press 
and hold the

button, the siren emits one long chirp to confirm 

the remote has been learned.