Universal 80-FAP Manuel D’Utilisation

Page de 6
SERVICING
A hazardous condition may result if a heater is used that
has been modified or is not functioning properly.  When the
heater is working properly:
* The flame is contained within the heater.
* The flame  is essentially blue with perhaps
some yellow tipping.
* There is no strong disagreeable odor, eye
burning or other physical discomfort.
* There is no smoke or soot internal or external to
the heater.
* There are no unplanned or unexplained shut
downs of the heater.
The parts lists and wiring diagram show the heater as it was
constructed.  Do not use a heater which is different from
that shown.  In this regard, use only the hose, regulator and
cylinder connection fitting (called a POL fitting) supplied
with the heater.  Do not use alternates. For this heater, the
regulator must be set to supply 11" water column (W.C.)
outlet pressure (.40 psig).  If there is any uncertainty about
the regulator setting, have it checked.
A heater which is not  working right must be repaired, but
only by a trained, experienced service person.  Contact the
factory for the service center closest to you, phone number
(909) 981-5343.
You may also obtain in-warranty or out-of-warranty service
by returning the product freight prepaid to:
Scheu Products Company
8855 Baker Avenue
Rancho Cucamonga, CA 91730
In-warranty products returned to the Service Department
will be repaired with no charge for either parts or labor and
will be returned to you freight prepaid.  Please include a
brief statement indicating date, place of purchase, the
nature of the problem and proof of purchase.
Out-of-warrranty products returned to the Service Depart-
ment will be repaired with a charge for parts and labor and
will be returned to you freight collect.
TECHNICAL INFORMATION
HOW MUCH HEAT DO I REQUIRE?
For economy, it is important to match input to that
required.  But heat requirements often vary.  For ex-
ample, it usually takes a lot more heat to get things warm
than it does to keep them that way.  Likewise, outside air
temperature usually changes during the day so you may
need more heat at night than you do in the daytime.  An
approximation of the heat required can be found by using
the chart below.
BTU'S PER HOUR REQUIRED
Cubic feet
Temperature Rise Required (
o
F)*
of space to
be heated
20
o
30
o
40
o
50
o
  5,000
14,000
20,000
27,999
34,000
  7,000
19,000
28,000
38,000
47,000
 10,000
27,000
40,000
54,000
67,000
 15,000
40,000
60,000
80,000         100,000
 20,000
54,000
80,000        107,000         133,000
 30.000
80,000        120,000        160,000         200,000
 50,000                133,000         200,000        266,000        333,000
WARNING:
   
When using a thermostat the heater exit
area should be protected from personnel and warnings
posted of sudden startup.
SCHEU PRODUCTS COMPANY, INCORPORATED
MAIL: P.O. BOX 250, UPLAND, CA 91785
PLANT: 8855 BAKER AVE., RANCHO CUCAMONGA, CA 91730
TELEPHONE:  909-981-5343
ANSI Z83.7b-1993/CGA 2.14-1972
Construction Heater
P/N 7743D
September 2000
150-FAST/SPC-150T
Page 4