Summit BIM70 Manuel D’Utilisation

 

 

15

 
 
 

Operating Method 

1. Switch on the Power switch on the right side   

panel. The light will be on. The ice 
maker will start working automatically 
and feeding water. 

 

2. After the first feeding of the water, the 

machine will automatically go to the ice 
making stage, and the sound of water 
spraying will be heard. 

 

3. Ice will be harvested to the ice storage 

bin. When the storage bin is filled to the 
point that the ice-full sensor is covered, 
the ice maker will automatically stop 

working. The machine will 
restart making ice once the 
storage bin is less than full. 

than full. 

 

4. Excess water will flow through the drain outlet at the back of the machine and empty into   

the floor drain. 

 

IMPORTANT: 

• 

Although the unit has been tested at the factory, due to long-term transit and storage, 

the first batch of cubes must be discarded. 

• 

Never turn the water supply tap off when the icemaker is working. 

 
 
 
 

How the Machine Makes Ice 

 

There are two distinct cycles: freeze and harvest. During the freeze cycle, water is sprayed 

against the evaporator surface. In the harvest cycle, the ice is released and water enters the 
machine. A complete cycle takes about 20 minutes, but is dependent on temperature and 
operating conditions. 

Freeze: During the freeze cycle the compressor is pumping refrigerant, the fan motor   

  is blowing air, and the water pump is circulating water. When the batch of ice has been   

    fully formed, the ice maker stops the freeze cycle and begins to harvest the 

ice.

 

 

 

   

ice.