SnapGear 1.7.8 Manuel D’Utilisation

Configure PCs to use SnapGear appliance Internet gateway 

The PCs on your network must be configured to use the SnapGear appliance as the 
default gateway for Internet access. See the section called Configuring the PCs on your 
network for more information. 

Establishing the connection 

If you are connecting to your ISP using a modem or ISDN connection, the SnapGear 
appliance will automatically place a call when an application requires access to the 
Internet (e.g. sending e-mail, browsing the web, etc). 

To establish the connection: 

1.  From any PC on the network, launch a browser application (e.g. Internet Explorer 

or Netscape Navigator). 

2.  The SnapGear appliance will dial the ISP and log in. On the front panel, the COM 

LED will flash when establishing the connection. 

3. The ONLINE LED will light when the Internet link is created and your browser will 

display the default home page. 

4. If Dial-on-demand/Idle time is enabled, the SnapGear appliance will also 

disconnect from the Internet when the connection is idle for the specified period. 

Internet access is automatic if you are using a permanent connection device (e.g. cable 
modem) or if you are using ADSL or an analog modem configured to stay connected.