Snow Joe Snow Blower snow joe Manuel D’Utilisation

3

perform a test run the first time you use the snow blower 
or after replacing parts to ensure that the unit is functioning 
properly.

• Preliminary area inspection – Clear the area to be plowed 

before each use. Remove all objects such as rocks, broken 
glass, nails, wire, or string, which can be thrown by or 
become entangled in the snow blower. Keep the area of 
operation clear of all persons, children, and pets.

• Excessive force – The snow blower was designed to 

respond at a certain rate for various snow conditions for 
optimal safety and performance. Do not force it; keep the 
applied pressure constant throughout its operation.

• Malfunctioning switch – Do not use the snow blower if 

the switch does not turn it on and off. Any appliance that 
cannot be controlled by the switch is not safe to use and 
must be repaired.

• Hitting an object – If the snow blower accidentally strikes 

an object, first stop the snow blower and remove the 
battery; next, inspect for damage; finally, repair or replace 
any damaged part before restarting and operating the  
snow blower.

• Discharge chute safety – Never direct the snow discharge 

chute at the operator, at bystanders, at vehicles, or at 
windows. The discharged snow, which may contain foreign 
objects accidentally picked up by the snow blower, can 
cause serious damage and personal injury. Do not use your 
hands to unclog the discharge chute. Stop the motor before 
removing debris.

• Hand-held operating position – Operation of the snow 

blower in the hand-held position is unsafe.

• Abnormal operation – If you find that the snow blower 

is not running properly or hear abnormal sounds from the 
engine, immediately stop the machine, remove the battery, 
and contact your original distributor.

• Noise control – When using the snow blower, respect 

the local laws and regulations regarding noise control and 
environmental protection. To avoid noise disturbance, you 
should carefully decide upon an appropriate operation time 
and consider the surrounding conditions.

• When work is completed – Disconnect the snow blower 

from the power source when not in use, when changing 
accessories, and before performing any maintenance task.

• Store safely – Store the snow blower indoors in a dry area 

between uses. Keep in a locked area, where children and 
unauthorized users cannot gain access. Do not store the 
machine while it is still connected to the power source. It 
may cause damage and injury.

• Maintain for safety and longevity – Check for 

misalignment or binding of moving parts, breakage of 
parts, and any other conditions that may affect the unit’s 
operation. If damaged, repair or replace the damaged part 
before use. Use only those replacement parts made for your 
model. When replacing any parts, you must strictly observe 
the instructions and procedures described in this manual. 

Special care should be paid to any rubber parts, since 
these parts may increase the engine load and decrease its 
mechanical power if damaged.

• Electrical plugs must match the outlet – Never modify 

the plug in any way. Do not use any adapter plugs with 
grounded appliances. Unmodified plugs and matching 
outlets will reduce the risk of electric shock.

• Avoid accidental starting – Make sure the safety switch 

and the switch bar lever is in the OFF position before 
inserting the battery pack into the unit. Do not carry the 
snow blower with the safety switch and switch bar lever 
engaged.