Simrad SIMRAD HS50 Manuel D’Utilisation

Simrad HS50 Heading Sensor 

36 

20221081 / F 

GPS heading, the heading output is determined from the inertial 
element. 

The data quality status information indicated on the Display unit 
is also included in some of the NMEA messages that can be 
output on the serial lines. 

HDT

 

When pressing the 

 button, the HS50 will toggle 

between two different displays for heading information. 

Primary NAV1/HDT display, shown after the start-up screen 
when the HS50 is turned ON. 

True heading is shown as a big number in the center of the 
compass with the COG value above it. 

 

Secondary NAV1/HDT display. 

This display shows heading, course over ground and speed over 
ground values in big characters. 

POS

 

The HS50 will toggle between three different displays for 
position information when the 

 button is pressed. 

 

Primary display shown when the 

 button is pressed 

once. The display shows main navigation information. 

 

Secondary NAV2/POS display. 

The display presents position information in large numbers.