Siemens LC479050UC Manuel D’Utilisation

English 3

 Figure 1: Prepare Ductwork

The hood must be mounted through the back wall. It cannot be mounted from 
above. See General Information, page 2, for suggestions for determining hood 
height. 

Once the preferred height is determined, draw a line at the vertical centerline of 
the cooking appliance.

Use the installation template to locate and mark the screw holes.

Drill 4 pilot holes for hood screws and 2 pilot holes for chimney screws. Install 
plugs in screw holes so that they are flush with the wall.

Note: At least one screw must be installed through a stud.

Figure 2: Prepare Wall

transition

one way damper

lower hood screw holes

upper hood screw holes

chimney screw holes

centerline

template

30" min.