Siemens TV Converter Box G120 Manuel D’Utilisation

 

 

 

 

 

 

 

    

 

 

 

 

T I A  Training Document

 

Page 137 of 147 

 Module  

 

     H01 

Issued: 02/2008 

  Frequency Converter SINAMICS G120 on PROFIBUS DP and PROFINET 

Preface         Notes         Startup with PROFIBUS         Startup with PROFINET         Program Example 

The Main Setpoint (HSW) 
 

 

 
The main setpoint is a 16 bit word that transmits the required frequency setpoint to the converter.   
The setpoint is transmitted as a signed integer (-32768 to 32767). The value 16384 (4000 hex) 
corresponds to +100%.  
 
By means of the parameter P1082,  the value 100% is normalized to a plant frequency.  In this 
parameter, the frequency value is entered to which a setpoint of 100% is to correspond over the 
serial interface.   
 
The output frequency is calculated as follows: 
 
f = (HSW x P1082)/16384 
 
 
6.1.4 

 

 

 
The main actual value is a 16 bit word that transmits the converter’s actual frequency output. The 
normalization of this value corresponds to that of the setpoint. 
 

 

 Bit No. 

   Bit No.