Siemens Network Hardware SM2 monitoring system Manuel D’Utilisation

U3585-J-Z125-8-76

53

SM2 monitoring programs

The TLM (TASK LOCK MANAGER) monitoring program records monitored data on locks
managed by the Task Lock Manager. The occupation and average queue length of each
lock are determined.

The monitored data returned will be of interest only to performance specialists, since
detailed knowledge of the internal workings of the system is required to interpret it.

The UTM monitoring program records application-specific monitored data and outputs it to
the screen or to the SM2 output file. It can only generate monitored data if the following
conditions have been fulfilled:

–

the UTM-SM2 subsystem is started

–

the UTM applications are delivering data

–

BS2000 Accounting is started (only for DB-specific user values).

For UTM versions < V5.0, the UTM-SM2 subsystem must be started manually before the
respective UTM application begins to deliver data.
As of UTM V5.0, the UTM-SM2 subsystem is started automatically.

The UTM application must be ready to deliver data to SM2.
In the KDCDEF run (operand MAX SM2=ON / OFF / NO), it is possible to influence the
transfer of monitored data.

–

SM2=OFF (default setting)
No monitored data is delivered.
If you use the UTM administration interface with KDCAPPL and SM2=ON, the transfer
of monitored data can be activated subsequently for each UTM application.

–

SM2=ON
Data is delivered.
Additional administration is not required.

–

SM2=NO
No data is delivered. It is not possible to start the transfer of data subsequently.

The settings for the transfer of monitored data are active only if the UTM-SM2 subsystem
has already been started (only applicable for UTM versions < V5.0).