Sennheiser EK 300 IEM Manuel D’Utilisation
15
Adjusting settings via the operating menu
Scanning for, releasing and selecting frequency presets –
“Easy Setup”
“Easy Setup”
Selecting the frequency bank and the channel – “Frequency Preset”
Overview of the frequency banks and channels:
Entering a name – “Name”
Via the “
Name
” menu item, you can enter a freely selectable name (e.g. the
name of the performer) for the receiver. The name is displayed on the
“
“
Frequency/Name
” standard display (see page 10). The name can consist
of up to 8 characters such as:
• letters (without pronounciation marks),
• numbers from 0 to 9,
• special characters and spaces.
To enter a name, proceed as follows:
Menu item
Function of the menu item
Reset List
Releases all locked frequency presets
Current List
Selects an unused frequency preset
Scan New List Automatically scans for unused receiving frequencies
(frequency preset scan)
If receiving frequencies are used, they will be locked; if
receiving frequencies are unused, they will be released.
receiving frequencies are unused, they will be released.
After the frequency preset scan, you can select an unused
frequency preset.
frequency preset.
When setting up multi-channel systems, please observe the
following:
following:
Only the factory-preset receiving frequencies within one
frequency bank (“
frequency bank (“
1
” to “
20
”) are intermodulation-free. It is vital
to observe the notes on frequency selection on page 20.
Frequency bank
Channels
Type
“
1
” to “
20
”
up to 16 per
frequency bank
frequency bank
System bank:
frequencies are factory-preset
frequencies are factory-preset
“
U1
” to “
U6
”
up to 16 per
frequency bank
frequency bank
User bank:
frequencies are freely selectable
frequencies are freely selectable
왘
Press the rocker button to select a character.
왘
Press the
SET
button to change to the next segment/character
or to store the complete entry.
Menu
B.Ch: 1. 1
Frequency Preset
B.Ch:
863.100MHz
Frequency Preset
1
. 1
B.Ch:
Frequency Preset
“Stored”
SET
SET
SET
6.
3
824.500MHz
Call up “Frequency
Preset”
Select the frequency
bank and confirm
Select the channel;
store the setting
Menu
L i c h a e l
Name
Name
Name
L
i c h a e l
M
i
chael
“Stored”
Call up “Name”
Enter a character
and confirm
Enter a character;
store the setting
SET