Sanyo VSP-3000 Manuel D’Utilisation
Preparations
9
① ②
③
④
⑤
① Power terminal (DC 12 V)
Connect the accessory AC adapter to the DC
terminal.
terminal.
② USB mouse port (USB)
Connect the accessory USB cable to this port if
using a DVR with a mouse function.
using a DVR with a mouse function.
③ RS-485/RS-422 communication
terminals (TRx, Tx3, Tx2, Tx1)
When operating a camera or DVR, connect the
cable from that device to the accessory connector,
and then insert the connector into these terminals.
cable from that device to the accessory connector,
and then insert the connector into these terminals.
TRx Tx3 Tx2 Tx1
*1
*2
*1 For Sanyo SSP connections (TRx)
+:
+:
RS485A
−:
RS485B
If the DVR uses only an RJ11 terminal,
use the accessory modular cable and the
conversion connector. (P11)
use the accessory modular cable and the
conversion connector. (P11)
*2
For PELCO-D/HSSP connections (Tx3 to
Tx1)
Tx1)
+:
RS485A
−:
RS485B
④ Program terminal (PROGRAM)
This is for service use.
⑤ Battery compartment (DC 9 V)
Use commercially-available alkaline battery.
Rear
Part names (continued)
01GB_L8CSE_WA_VSP3000.indd 9
01GB_L8CSE_WA_VSP3000.indd 9
2008/02/29 13:16:59
2008/02/29 13:16:59