Sanyo DVR-S120 Manuel D’Utilisation

35

The passcode for setting parental level is required. 
(When the DVD recorder is shipped from the factory, 
no passcode is set. So, the passcode must fi rst be set.) 
Follow the procedure below to set the passcode.
1)  "Enter code" will be displayed. Enter a four-digit 

code using the number buttons. Entered codes are 
indicated by "*".

Set Parental Controls

Enter Code

Press SYSTEM to Save and Exit.

2) When "Confi rm Code" is displayed, enter the 

four-digit code again for confi rmation.  When  the 
code has been set, the display returns to "Press 
k".

-  When the "Set Parental Controls" screen is dis-

played from the second operation onwards, "Enter 
Code" will be displayed on the 1st line instead of 
"Set Code". Parental level control can be set again 
by entering the correct passcode.

If you have forgotten the passcode, press e four times 

to set the entry fi eld to a non-set state. In this state, 
set the passcode again.

Set the level of parental control.
Press the k button, and then press 4 or 6 to 

adjust the level. Press the k button again to apply 

the level you set.

Set Parental Controls

Press OK

Set Code

Set Country

Press SYSTEM to Save and Exit.

Press OK to Select

The set fi lter values depend on the respective country. 
It is therefore necessary to enter the country to which 
these fi lter values apply.
When you press the k button, the country name is 

displayed. Select the desired country using 8 or 2, 

and press the k button.

-  When you press 4, other items in the System Menu can be se-

lected.

 

Set other items as necessary.

6.  To send setting, press SYSTEM MENU.

If you attempt to play back a DVD video set with parental level controls, 
the following screen will be displayed:

The Disc You are Attempting to View

is Protected with a Passcode.

Enter the four-digit passcode to start playback.

DVR_S120_INS_MANUAL.indd   35

DVR_S120_INS_MANUAL.indd   35

5/19/2005   11:54:28 AM

5/19/2005   11:54:28 AM