SANRAD V-Switch Manuel D’Utilisation
Chapter 4: V-Switch Configuration
45
4
V-Switch Configuration
IN THIS
CHAPTER
I
NTRODUCTION TO
M
ANAGING THE
V-
S
WITCH
C
ONFIGURING THE
V-
S
WITCH
3000
M
ANAGEMENT
P
ARAMETERS VIA
LCD
C
ONFIGURING THE
M
ANAGEMENT
C
ONSOLE
I
NITIALIZING THE
V-
S
WITCH
C
HANGING
M
ANAGEMENT
P
ARAMETERS
C
ONFIGURING THE
S
TORAGE
P
ORTS
C
ONFIGURING THE
N
ETWORK
P
ORTS
D
ISCOVERING I
SCSI
T
ARGETS
C
ONFIGURING I
SCSI
P
ORTALS
C
ONFIGURING
IP
R
OUTING
After the V-Switch is connected properly to the physical disks,
management station and the network and powered up, the V-
Switch must be configured.
management station and the network and powered up, the V-
Switch must be configured.
The basic V-Switch configurations define the management IP
configurations and can be done either via the LCD panel for the V-
Switch 3000 or the RS232 console port for both the V-Switch 3000
and the V-Switch 2000.
configurations and can be done either via the LCD panel for the V-
Switch 3000 or the RS232 console port for both the V-Switch 3000
and the V-Switch 2000.
Once the management port is configured, any other V-Switch
configuration can be executed through the management port or
continued through the RS232 console port.
configuration can be executed through the management port or
continued through the RS232 console port.
Disks and LUNs connected to the storage ports are discovered and
registered automatically.
registered automatically.