SANRAD V-Switch Manuel D’Utilisation
66
SANRAD V-Switch User Manual
Configuring IP Routing
To enable communications between the V-Switch and IP networks located
outside the V-Switch LAN, you must configure IP routing paths for each
external network port. The IP route begins with a specified network port on
the V-Switch and ends at the external network IP address. Just as each IP
address is unique, each IP routing path is unique. There can be only one IP
route to a given external network IP address per V-Switch.
outside the V-Switch LAN, you must configure IP routing paths for each
external network port. The IP route begins with a specified network port on
the V-Switch and ends at the external network IP address. Just as each IP
address is unique, each IP routing path is unique. There can be only one IP
route to a given external network IP address per V-Switch.
In Figure 31, page 68, you have two V-Switches connected to three different
LANs (A, B, C). In turn, each LAN is connected to at least one external
network (D, E, F).
LANs (A, B, C). In turn, each LAN is connected to at least one external
network (D, E, F).
On V-Switch 1, network ports Eth1 and Eth2 can both access Network D:
P
ORT
LAN
R
OUTER
L
EG
E
TH
1
A
20.20.10.20
You can configure
only one IP route to a
given external
network on your V-
Switch.
E
TH
2
B
30.30.20.20
Only one of these paths can be configured for V-Switch 1.
Cloud
10
22
7
V Switch 1
V Switch 2
Clou
d
Clou
d
Network D
Network E
R
R
R
10.10.20.0
20.20.10.20
30.30.20.20
12.11.20.20
10.11.30.0
20.22.11.11
10.12.40.0
Etherne
t
LAN A
Etherne
t
LAN C
Etherne
t
LAN B
Network F
D
B
D
A
Figure 31.
IP Routing Options