Ryobi Expand-it UT15520C Manuel D’Utilisation

Page de 20
3
 WARNING:
Read and understand all instructions. Failure to fol-
low all instructions listed below, may result in electric 
shock, fire, and/or serious personal injury.
SAVE THESE INSTRUCTIONS
 
Read these instructions and the instructions for the power 
head thoroughly before using pruner.
 
Know  the  tool.  Read  and  understand  the  operator’s 
manual and observe the warnings and instruction labels 
affixed to the tool.
 
Do not allow children or untrained individuals to use  this 
unit.
  Wear safety glasses or goggles that are marked to comply 
with ANSI Z87.1 standards and hearing and head protec-
tion when operating this unit.
 
Wear heavy long pants, boots, and gloves. Do not wear 
loose fitting clothing, short pants, jewelry of any kind, or 
go barefoot.
 
Secure long hair so it is above shoulder level to prevent 
entanglement in any moving parts.
 
Keep  all  bystanders,  children,  and  pets  at  least  50  ft. 
away.
  Stay alert, watch what you are doing, and use common 
sense when operating a power tool. Do not use tool while 
tired or under the influence of drugs, alcohol, or medica-
tion. A moment of inattention while operating power tools 
may result in serious personal injury.
  Do not operate in poor lighting.
 
Do not overreach. Keep proper footing and balance at all 
times. Proper footing and balance enables better control 
of the tool in unexpected situations.
  Keep all parts of your body away from any moving part.
  Do not touch areas around the muffler or cylinder of the 
power head. These parts get hot from operation. Failure 
to  heed  this  warning  could  result  in  possible  serious 
personal injury.
  Always stop the engine and remove the spark plug wire 
before  making  any  adjustments  or  repairs  except  for 
carburetor adjustments.
  Inspect unit before each use for loose fasteners and dam-
aged or missing parts. Correct before using the pruner 
attachment. Failure to do so can cause serious injury.
 
Use  only  original  manufacturer’s  replacement  parts. 
Failure to do so may cause poor performance, possible 
injury, and will void your warranty.
 
Do not, under any circumstance, use any attachment or 
accessory on this product, which was not provided with 
the product, or identified as appropriate for use with this 
product in the operator’s manual.
 
Avoid dangerous environments. Do not use the attach-
ment in damp or wet locations. Do not use in rain.
 
Use the right attachment. Do not use attachment for any 
job except that for which it is intended.
  Keep hands away from cutting area. Keep hands away 
from blades. Do not reach underneath work or around 
or over the blade while blade is rotating. Do not attempt 
to remove cut material when blade is moving.
  Blade coasts after being turned off.
GENERAL SAFETY RULES