Ryobi Cordless Saw TS1343L Manuel D’Utilisation

11

See Figure 2.
The miter lock handle securely locks the saw at desired 
miter angles.

Positive stops have been provided at 0

°

, 15

°

, 22-1/2

°

, 31.6

°

, 

and 45

°

. The 22-1/2

°

 and 45

°

 positive stops have been  

provided on both the left and right side of the miter table.

The lower blade guard is made of shock-resistant, see-
through plastic that provides protection from each side of 
the blade. It retracts over the upper blade guard as the saw 
is lowered into the workpiece.

See Figure 3.
The spindle lock button locks the spindle stopping the blade 
from rotating. Depress and hold the lock button while install-
ing, changing, or removing blade.

See Figure 4.
To prevent unauthorized use of the compound miter saw, 
disconnect it from the power supply and lock the switch in 
the off position. To lock the switch, install a padlock (not 
included) through the hole in the switch trigger. A lock with 
a long shackle up to 5/16 in. diameter may be used. When 
the lock is installed and locked, the switch is inoperable. 
Store the padlock key in another location.

The following tools (not included) are needed for making adjustments or installing the blade:

Fig. 5