Roland V-Studio VS-20 Manuel D’Utilisation

Panel Descriptions

fig.front01.eps

If you press this while the editor is running, the Tuner in 
the VS-20 Editor will appear.

Here you can tune your instrument.

This adjusts the sensitivity of the signal that's being 
input to the MIC 1, MIC 2, LINE, and GUITAR/BASS jacks.

If an excessive input signal is detected, the PEAK 
indicator will light.

For the best possible recording quality, input the signal and 
adjust the [SENS] knob until it is as high as you can get it 
without causing the PEAK indicator to light.

This button enables the signal input from MIC 1 (built-
in stereo mics).

This button enables the signal input from MIC 2 jack.

This button enables the signal input from LINE jacks.

This button enables the signal input from GUITAR/BASS 
jack.

Here you can control the V-STUDIO's playback and 
recording.

fig.front01.eps

Press this button to move the Now Time to the 
beginning of the project.

Press this button to rewind the Now Time.

Press this button to stop playback.

Press this button to start playback.

If you press this button during playback, the playback 
pauses. Press again, to resume playback.

Press this button to fast-forward the current time.

Press this button to start recording on tracks that are 
selected for recording (record enabled).

If you press this button during playback, you can start 
recording tracks that are record-enabled without 
stopping playback.

Input section

1

2

3

4

5

6

1

2

3

4

5

6

By pressing [MIC 2] and [GUITAR/BASS] 
simultaneously, you can make input settings for 
simul-recording. For more about simultaneous 
recording, refer to p. 28.

Transport section

1

2

3

4

5

6

VS-20_e.book  20 ページ  ２０１０年１月１８日　月曜日　午前９時８分