Revolabs TV Converter Box 07-stemic-ppp Fascicule
Rev 1.1 10/07
L
L
L
Line
ine
ine
ine----to
to
to
to----Mic Converter
Mic Converter
Mic Converter
Mic Converter
Users Guide
Users Guide
Users Guide
Users Guide
The Revolabs Solo™ Line-to-Mic Converter cable is designed to facilitate Revolabs system installations
requiring attenuation from line level to microphone level as found on many videoconferencing systems
and audio mixers. The cable also blocks phantom power bias voltages up to 48V.
requiring attenuation from line level to microphone level as found on many videoconferencing systems
and audio mixers. The cable also blocks phantom power bias voltages up to 48V.
To use the Line-to-Microphone level converter cable:
Step One:
Plug the 2.5mm mini-plug into the Solo Executive Single Channel analog line level input.
Step Two:
Insert the XLR Male connector to a microphone-level (-40dB) input channel on the audio mixer or
video codec.
video codec.
Step Three:
If desired, use the return audio RCA Female connector to monitor audio from the mixer / video
codec through an earpiece connected to the microphone.
codec through an earpiece connected to the microphone.
Cable Specifications
Length: 6 Ft (1.8m)
Connectors: 2.5mm Male mini-plug, RCA Female, XLR Male with Phantom-blocking 40 dB signal attenuation circuit
Model: 07-STEMIC-PPP
Connectors: 2.5mm Male mini-plug, RCA Female, XLR Male with Phantom-blocking 40 dB signal attenuation circuit
Model: 07-STEMIC-PPP
Warranty
Revolabs, Inc. warrants this product to be free of manufacturing defects. Repair or replacement of any defective
part or unit (at the discretion of the Seller) will be free of charge for a period of 90 days after purchase.
part or unit (at the discretion of the Seller) will be free of charge for a period of 90 days after purchase.