Psion Teklogix Vehicle-Mount Computer 8525 G2 Manuel D’Utilisation
Chapter 2: Basic Checkout
8525 G2/8530 G2 Freezer & Outdoor Guidelines
8525 G2/8530 G2 Freezer & Outdoor Guidelines
12
Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual
2.3 8525 G2/8530 G2 Freezer & Outdoor Guidelines
8525 G2/8530 G2 vehicle-mounts are sealed against dust and high-pressure water
jets to the international standard IP66.
jets to the international standard IP66.
2.3.1 Important Operating Instructions
Warning:
IT IS CRITICAL that this information be reviewed and that any
guidelines applicable to your vehicle-mount be strictly followed.
guidelines applicable to your vehicle-mount be strictly followed.
For All Freezer Vehicle-Mounts
•
Use vehicle-mounts only in the environments for which they are designed.
•
All Psion Teklogix freezer vehicle-mounts have built-in heaters where
required to warm internal components. To help maintain the temperature,
units should be switched on before entry into a freezer environment and
should be left connected to vehicle power and running at all times while in a
freezer environment.
required to warm internal components. To help maintain the temperature,
units should be switched on before entry into a freezer environment and
should be left connected to vehicle power and running at all times while in a
freezer environment.
•
When moving between freezer and warm, humid environments, window
condensation or icing on the outside of the display window is a normal
occurrence. Wiping the condensation from the window may help, but the
operator may need to wait until the condensation stops forming before use.
condensation or icing on the outside of the display window is a normal
occurrence. Wiping the condensation from the window may help, but the
operator may need to wait until the condensation stops forming before use.
•
To reduce condensation and frost on vehicle-mount displays, use an anti-
fogging agent once a week or as required.
fogging agent once a week or as required.
•
Contact lubricant and connector caps must be used on all external connec-
tors to maintain a moisture barrier and prevent corrosion during freezer and
outdoor use. On all 8525 G2/8530 G2 vehicle-mount computers, the contact
lubricant –PN 95146 (Nyogel) must be used. Further, the appropriate
contact lubricant should be replaced at least monthly in applications requir-
ing daily or frequent removal of cables. Refer to the table below for connec-
tor cap part numbers.
tors to maintain a moisture barrier and prevent corrosion during freezer and
outdoor use. On all 8525 G2/8530 G2 vehicle-mount computers, the contact
lubricant –PN 95146 (Nyogel) must be used. Further, the appropriate
contact lubricant should be replaced at least monthly in applications requir-
ing daily or frequent removal of cables. Refer to the table below for connec-
tor cap part numbers.
Table 2.1 Connector Caps
Vehicle-Mount Type
Connector Cap
Part Number
8525 G2/8530 G2
26-pin DSUB Female
9008295
8525 G2/8530 G2
9-pin DSUB
9008296
8530 G2
26-pin DSUB Male
9008294