Polycom Water System DOC2091A Manuel D’Utilisation
103
Chapter 8 System Configuration
Global Management System User’s Guide
Device Specific Configuration
Select the desired device type from the pull-down menu.
For all Devices
Polling
Global Management System polls the devices it is managing, with a polling period specific for
each the device type.
each the device type.
The default polling period for each device type is shown below.
Device Type
Default Cycle
ViewStation and FX/EX and
V-Series
V-Series
300 sec
ViaVideo
600 sec
iPower
300 sec
PathNavigator
300 sec
MGC
120 sec
WebCommander
300 sec
Other
300 sec
If your settings are left at the default, Global Management System will poll a specific ViewStation,
for example, every 5 minutes. Note that, if a ViewStation is turned off within that 5 minute cycle,
it will not be designated online until Global Management System polls that device again (up to 5
minutes later). If the ViaVideo application is closed but it’s PC remains connected to the network,
it will immediately show up as not responding.
for example, every 5 minutes. Note that, if a ViewStation is turned off within that 5 minute cycle,
it will not be designated online until Global Management System polls that device again (up to 5
minutes later). If the ViaVideo application is closed but it’s PC remains connected to the network,
it will immediately show up as not responding.
You can change the default setting to have more frequent polling. However if a video device is in
a call, the video quality during the call may be compromised.
a call, the video quality during the call may be compromised.
To change the polling frequency
1. Select the device type from the pull-down menu.
2. Change the value to the desired value representing the time between polls. Remember
2. Change the value to the desired value representing the time between polls. Remember
this is in seconds.
3. Click on
Update Setting.
Server Preferences