Polaroid 45 Ultra Manuel D’Utilisation
English
5
The 120 Film Adapters (Page 11)
Steps 3 and 4 on pages 11 and 12 have changed to the following:
3
Orient the 120 film adapter with the correct side up and the
notches (a) on the left. Place the unmounted film over the
opening so the image is right-reading and the top of the
image is at the top of the adapter.
notches (a) on the left. Place the unmounted film over the
opening so the image is right-reading and the top of the
image is at the top of the adapter.
4
Secure the film by placing the two magnets provided on the
top and bottom edges. The magnets must not extend over the
depressed channel surrounding the film placement area.
top and bottom edges. The magnets must not extend over the
depressed channel surrounding the film placement area.
Inserting the Carrier Into
the Scanner (Page 14)
the Scanner (Page 14)
Step 2 has the following note added:
Note: When inserting the 4x5 film carrier, make sure the words
"LOCK" and "UNLOCK" face upward. For the four-slide carrier,
the words "THIS SIDE UP" face upward.
"LOCK" and "UNLOCK" face upward. For the four-slide carrier,
the words "THIS SIDE UP" face upward.
a
©
2000 Polaroid Corporation, Cambridge, MA 02139 USA. "Polaroid", "PolaColor"
and "SprintScan" are trademarks of Polaroid Corporation. All other product names
may be trademarks of their respective owners. All rights reserved.
and "SprintScan" are trademarks of Polaroid Corporation. All other product names
may be trademarks of their respective owners. All rights reserved.
PL-000000-0