Tyco American Dynamics VideoEdge IP Box Camera 8200-2646-00 B0 Manuel D’Utilisation

Installation and Operation Guide

2.2 Flank Panel

-- Left Flank Panel --

-- Right Flank Panel --

1. Lens

Mount:

This IP camera is used with either a C or a CS mount lens.

2. DIP

Switch:

1. AES: Auto electric shutter.

2. DC IRIS: Use an auto iris (DC drive)

3. DHCP: Turn On / Turn Off to use the DHCP protocol. If the switch points

upwards, the device can change the setup of network function
(enable/disable) via the network.

4. STATIC IP: If the switch points down, the device can’t obtain an IP address

from the DHCP server. This option is needed to configure the
network communication settings.

(*In the default factory configuration, this DIP Switch is in the Down position.)

3. ALARM

I/O:

This is a 6-PIN connector including the ALARM IN/OUT, ALARM RESET

and GROUND items for connecting with external devices.

RS485 pin: D+

RS485 pin: D-

GND: Ground Contact.

ALARM IN (INPUT): This is an alarm input which can be programmed in the menu

system to Normally Open or Normally Closed. ( )

ALARM OUT (OUTPUT): This is an alarm-output trigger. Connect this to external

devices such as buzzers or lights. ( )

ALARM RST (RESET): This pin connects to an alarm-clear device for clearing an

alarm. ( )

0V(Active)