Tyco American Dynamics VideoEdge IP Box Camera 8200-2646-00 B0 Manuel D’Utilisation
16
Installation and Operation Guide
3. INSTALLATION
Please follow the instructions and the diagram below to set up the system.
NOTE: The IP camera is linked by its Video Out connection via a BNC connector to a
monitor's Video In connection. If this connection is there, you can see some
information on the monitor screen, such as the IP camera factory default Static IP
address(192.168.1.168). But the IP camera Static IP address can only appear if
there is a connection between the IP camera and another device. If there is no
such connection, the IP camera factory default Static IP address will not appear
on the monitor screen.
3.1 CONNECTING WITH AN NVR
Use a straight LAN cable to connect directly to an NVR.
SD Card
RS-232
ALARM
DC12V
AUDIO
VIDEO
OUT
OUT
I/O
RS-485
ETHERNET
10/100
LAN CAMERA
CONNECT TO ETHERNET
RJ45 CONNECTOR
RJ45 CONNECTOR
CONNECT TO NVR
ETHERNET PORT
ETHERNET PORT
3.2 CONNECTING WITH A DVR
SD Card
RS-232
ALARM
DC12V
AUDIO
IN
IN
OUT
OUT
VIDEO
TO
MONITOR
TO
MUX'S VCR IN
FROM MUX
MAIN MONITOR
I/O
RS-485
ETHERNET
10/100
LAN CAMERA
CONNECT TO VIDEO OUT
BNC CONNECTOR
BNC CONNECTOR
CONNECT TO DVR
VIDEO IN
VIDEO IN