Turbonetics P/N 15152 Manuel D’Utilisation
60133 revG
Page 2 of 38
READ THIS FIRST: Study these instructions completely before proceeding. Engine and/or turbocharger damage
may occur if any component within these instructions is improperly installed. Turbonetics, Inc or any of its
distributors cannot be held responsible for damages as a result of negligent or improper installation. This
complete turbocharger system can be installed using common tools and automotive procedures, but installer must
have a thorough knowledge of automotive engine operation and feel comfortable working on the vehicle. If in
doubt, contact Turbonetics’ technical support staff at 805-581-0333, between the hours of 8:00AM and 5:00PM
PST, Monday through Friday.
may occur if any component within these instructions is improperly installed. Turbonetics, Inc or any of its
distributors cannot be held responsible for damages as a result of negligent or improper installation. This
complete turbocharger system can be installed using common tools and automotive procedures, but installer must
have a thorough knowledge of automotive engine operation and feel comfortable working on the vehicle. If in
doubt, contact Turbonetics’ technical support staff at 805-581-0333, between the hours of 8:00AM and 5:00PM
PST, Monday through Friday.
Remove the turbocharger system from its carton and inspect for any obvious physical damage. All kit
components are thoroughly inspected and carefully packaged prior to shipment from the factory. If any shipping
damage is evident, contact your supplier and request that they process a claim with the shipper involved. Be sure
to review the parts list on page 3 to verify that you have all necessary system components to proceed. If any
components in the parts list are missing, contact Turbonetics’ customer service staff.
Although this turbocharger system has been designed to use many of the factory emissions controls, it is not
currently “smog” legal in California, and therefore recommended for “off road” use only. In other states, check
local laws regarding aftermarket modification to emission controlled vehicles.
The information contained in this publication was accurate and in effect at the time the publication was approved
for printing and is subject to change without notice or liability. Turbonetics reserves the right to revise the
information presented herein or to discontinue the production of parts described at any time.
SAFETY REQUIREMENTS: It is recommended to follow these precautions.
• Always wear safety glasses & gloves.
• Turn the ignition switch to the OFF position & disconnect the battery.
• Always use properly rated jack stands when working under the vehicle.
• Prevent unexpected vehicle movement by using wheel chocks and/or parking brake.
• Operate the vehicle only in well ventilated areas.
• Do not smoke or use flammable items near or around the vehicle’s fuel system.
• Keep hands, clothing and other objects away from moving parts when engine is running.
SUPPLIES: It is recommended to have the following items before beginning installation.
SUPPLIES: It is recommended to have the following items before beginning installation.
• Toyota factory service manual, for your model year Scion TC
• A large table or bench, and plenty of adjacent available workspace
• Standard selection of automotive tools, primarily metric sizes
• An assortment of “zip ties” and/or thin-gauge steel wire
• The ability to securely lift the vehicle at least a few feet off the ground
• High temp. automotive RTV sealant
• NPT thread sealant
• Replacement engine oil and oil filter
• Hammer