PC Concepts 500PS Manuel D’Utilisation
Media Loading Problems
The front panel keeps indicating that media is misaligned or incorrectly positioned.
Roll media
•
•
The paper may be skewed. The right-hand edge must be parallel to the blue line on the front media deflector.
•
Ensure that the paper is wrapped tightly on the roll.
•
Check that the paper is correctly loaded onto the spindle, see
Sheet media
•
The sheet media must be loaded with the right-hand edge against the blue line on the printer platen and the
front edge against the blue line just after the pinch rollers, see
front edge against the blue line just after the pinch rollers, see
•
The media may be crumpled or warped or may have irregular edges.
•
If you are using hand-cut media, the edges may not form a right-angle or they may be rough. Do not use hand-
cut media. Use only purchased sheet media.
cut media. Use only purchased sheet media.
•
If the media is curled with the curl up it will be very difficult to load. It is easier to load it with the curl down