PASCO Specialty & Mfg. ENERGY SOLAR TRANSFER ET-8593 Manuel D’Utilisation
Energy Transfer - Solar
Model No. ET-8593
6
®
Note: If there is no shadow on the plate, the sun’s rays are
perpendicular to the plate.
perpendicular to the plate.
7. Plug the Temperature Sensor into a PASPORT Xplorer. To take a
temperature reading, click the Start button on Xplorer. (Note: The
Xplorer data can later be uploaded into DataStudio and viewed in a
DataStudio graph display.)
Xplorer data can later be uploaded into DataStudio and viewed in a
DataStudio graph display.)
OR
If you are using an ohmmeter (instead of a Temperature Sensor),
turn on the meter and take a resistance measurement. To find the
temperature, use the resistance-to-temperature conversion chart in
Appendix A.).
turn on the meter and take a resistance measurement. To find the
temperature, use the resistance-to-temperature conversion chart in
Appendix A.).
OR
If you are using a laptop and a temperature probe, plug the
Temperature Sensor plug into a USB port on your laptop computer.
Launch DataStudio and click the Start button to collect data.
Temperature Sensor plug into a USB port on your laptop computer.
Launch DataStudio and click the Start button to collect data.
WARNING: To avoid
burns or bodily injury,
when heating the box, do
not overheat the box
burns or bodily injury,
when heating the box, do
not overheat the box
(above 100
o
C) and do not
touch either side of the
aluminum plate or the
thermistor contact.
aluminum plate or the
thermistor contact.
CAUTION: Overheating
the box may permanently
damage the thermistor
and the plastic lid. The
thermistor’s maximum
temperature capacity is
the box may permanently
damage the thermistor
and the plastic lid. The
thermistor’s maximum
temperature capacity is
135
o
C.