Trane OA1D OA2D OA3D (Indirect Gas-Fired/Electric Heat) Manuel De Maintenance
OAU-SVX01E-EN
33
System Configuration and Pre-Start
The following procedure must be completed prior to
performing the start-up procedure in the system Start-Up
section in this document. This section describes
procedures to navigate the various displays on the Unit
Display and configure the Outdoor Air Unit Main Unit
Display system setpoints and operating parameters.
performing the start-up procedure in the system Start-Up
section in this document. This section describes
procedures to navigate the various displays on the Unit
Display and configure the Outdoor Air Unit Main Unit
Display system setpoints and operating parameters.
Important:
This section is intended to provide
guidelines for navigation through the
remote operator display screens. For
additional control system information, refer
guidelines for navigation through the
remote operator display screens. For
additional control system information, refer
to Integration Guide: Tracer™ UC600
Programmable Controller for Packaged
Outdoor Air Unit (BAS-SVP18A-EN, or the
most recent revision). The unit is configured
at the factory with the default settings as
described in
Programmable Controller for Packaged
Outdoor Air Unit (BAS-SVP18A-EN, or the
most recent revision). The unit is configured
at the factory with the default settings as
described in
; also refer to
for details
concerning setup and operating setpoints.