Packard Bell 160 Manuel D’Utilisation

SCART CABLE (NOT INCLUDED)

This is the recommended connection. If your TV has a SCART connector, you can connect the DVD player to the

TV with a SCART cable (as shown).

Certain cables can emit electromagnetic interference (EMI) to nearby electrical devices (especially

televisions and radios). To help avoid this we recommend that you use a cable equipped with a

ferrite core. Please see your retailer for more details.

GETTING STARTED

Using the Remote Control

1. Pull out the battery compartment (as shown).
2. Replace battery (Lithium CR2025); Carefully remove the battery from the

battery compartment and replace with the new battery.

3. Carefully re-insert the battery compartment into the remote control.

– Remove batteries if they are exhausted or if the Remote

Control is not being used for a long time.

– Batteries contain chemical substances, so they should be disposed of properly.

Turning on the unit
Note: Only after all connections are completed, connect the power cord and power on the unit.

1. Plug the standard electrical plug into a wall socket or power strip.
2. Turn on the TV and set to the correct video-in channel.

Inserting a disc

1. Press the POWER button on the front panel. The Power Indicator will turn green. The system is now ready to

use. You should see the DVD background screen on the TV.

2. Press the

(Open/Close) button to open the disc door and insert a disc, then press the same button again to

close the disc door. Make sure the label side is facing up. For a double-sided disc, load the side you want to play
facing up.

3. Playback will start automatically. If a disc menu appears on the TV, use the Navigation Keys to select the item

[PLAY MOVIE] and press OK to start the movie playback. If the disc is locked by the parental lock, you must
enter your four digit password.

6985590000-DVX-160-UG.book Page 7 Friday, March 24, 2006 6:10 PM