Panasonic Attune II Mode D’Emploi
11
English
Connecting and disconnecting the headset plug
Turn off the Belt Pack.
p Be absolutely sure to turn off the Belt Pack before
connecting or disconnecting the headset plug. Otherwise
the Belt Pack may malfunction.
the Belt Pack may malfunction.
Important
When connecting the headset plug to this
product, hold the plug and push it straight
into the earphone output jack and microphone
input jack.
When disconnecting the headset plug from
this product, hold the plug and pull it straight
out.
product, hold the plug and push it straight
into the earphone output jack and microphone
input jack.
When disconnecting the headset plug from
this product, hold the plug and pull it straight
out.
p Do not under any circumstances take hold of the cable and pull it free, pull the plug part out at a diagonal angle or use any
other unreasonable means to disconnect it. Doing so may cause the plug, connector area, and other parts to malfunction.
Caution
Do not hold the cable.
Do not pull this part up and down.