Toshiba Magnia Z300 Manuel D’Utilisation
![Toshiba](https://files.manualsbrain.com/attachments/acaaaa9cc6b763ccfc72ced2ae95d9c94b8b8632/common/fit/150/50/8adbcbcd45c75dc53932fc9caf6f2740daed52d836b76efbd0162ac2599f/brand_logo.png)
System Configuration Setup
SCSI Utility
SCSI Utility
154
c
Host Adapter SCSI Termination
: Enabled
Specifies whether the SCSI bus is to be terminated using the
SCSI host adapter. Do not change this setting.
SCSI host adapter. Do not change this setting.
c
Boot Device Options
Specifies the SCSI device from which the system is to be
booted.
booted.
c
Boot SCSI ID
: 0
Selects the SCSI ID of the device which boots the system. Do
not change this setting.
not change this setting.
c
Boot LUN Number
: 0
Selects the LUN of the device which boots the system. Do not
change this setting.
change this setting.
c
SCSI Device Configuration
Specifies detailed configuration information for each SCSI
device (SCSI ID).
device (SCSI ID).
c
Sync Transfer Rate (MB/Sec)
: 160
Specifies the maximum synchronous transfer rate of the
onboard SCSI controller.
onboard SCSI controller.
c
Initiate Wide Negotiation
: Yes
Set this item to Yes to specify Wide SCSI (16 bit data width).
c
Enable Disconnection
: Yes
Set this item to Yes to make the adapter activate the disconnect/
reconnect function and permit multiple-command processing.
reconnect function and permit multiple-command processing.
c
Send Start Unit Command
: Yes
Specifies whether a start unit command is to be sent from the
adapter to start the SCSI device.
adapter to start the SCSI device.
c
Enable Write-Back Cache
: N/C
Specifies whether to use the write-back cache.
c
BIOS Multiple LUN Support
: No