Toshiba MJ-1103 Manuel D’Utilisation

MJ-1103/1104

DISASSEMBLY AND INSTALLATION

4 - 26

4.3

Units (Saddle section: MJ-1104)

[A] Saddle unit

(1) Take off the front lower cover.

(2) Remove 3 screws, and then take off the SDL

board cover.

Fig. 4-71

(3) Release the harness out of 3 clamps, and

then disconnect each connector of CN10 and
CN13 on the SDL board.

Fig. 4-72

(4) Place a table beneath the pulled-out saddle

unit to steady it.

Note:

Store (flip up) the saddle unit support before
placing a table beneath the unit.

(5) Remove 8 screws and store the right and left

rails.

Fig. 4-73

SDL board cover

SDL board

Clamp

Table beneath

Saddle unit
support