Toshiba SD-43HK Manuel Du Propriétaire
Troubleshooting
45
•
The power cord is disconnected.
•
Plug the power cord into the wall outlet
securely.
securely.
No power.
•
No disc is inserted.
•
Insert a disc. (Check that the DVD or,
audio CD indicator in the display
window is lit.)
audio CD indicator in the display
window is lit.)
The power is on, but
the DVD receiver
does not work.
the DVD receiver
does not work.
•
The TV is not set to receive DVD
signal output.
signal output.
•
Select the appropriate video input mode
on the TV so the picture from the DVD
receiver appears on the TV screen.
on the TV so the picture from the DVD
receiver appears on the TV screen.
•
The video cable is not connected
securely.
securely.
•
Connect the video cable into the jacks
securely.
securely.
No picture.
•
The equipment connected with the
audio cable is not set to receive DVD
signal output.
audio cable is not set to receive DVD
signal output.
•
Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD receiver.
audio receiver so you can listen to the
sound from the DVD receiver.
•
The audio cables are not connected
securely.
securely.
•
Connect the audio cable into the jacks
securely.
securely.
•
The power of the equipment connected
with the audio cable is turned off.
with the audio cable is turned off.
•
Turn on the equipment connected with
the audio cable.
the audio cable.
•
The Digital Audio Output is set to the
wrong position.
wrong position.
•
Set the Digital Audio Output to the correct
position, then turn on the DVD receiver
again by pressing On/standby( ).
position, then turn on the DVD receiver
again by pressing On/standby( ).
No sound.
•
The disc is dirty.
•
Clean the disc.
The playback
picture is poor.
picture is poor.
•
No disc is inserted.
•
Insert a disc. (Check that the DVD, or audio
CD indicator in the DVD display is lit.)
CD indicator in the DVD display is lit.)
•
An unplayable disc is inserted.
•
Insert a playable disc. (Check the disc
type, color system and Regional code.)
type, color system and Regional code.)
•
The disc is placed upside down.
•
Place the disc with the playback side
down.
down.
•
The disc is not placed within the guide.
•
Place the disc on the disc tray correctly
inside the guide.
inside the guide.
•
The disc is dirty.
•
Clean the disc.
•
The Rating level is set.
•
Cancel the Rating function or change
the rating level.
the rating level.
The DVD receiver
does not start
playback.
does not start
playback.
•
The remote control is not pointed at the
remote sensor of the DVD receiver.
remote sensor of the DVD receiver.
•
Point the remote control at the remote
sensor of the DVD receiver.
sensor of the DVD receiver.
•
The remote control is too far from the
DVD receiver.
DVD receiver.
•
Operate the remote control within about
23 ft (7 m).
23 ft (7 m).
•
There is an obstacle in the path of the
remote control and the DVD receiver.
remote control and the DVD receiver.
•
Remove the obstacle.
•
The batteries in the remote control are
exhausted.
exhausted.
•
Replace the batteries with new ones.
The remote control
does not work
properly.
does not work
properly.
Symptom
Cause
Correction
•
The connected TV power is turned off.
•
Turn on the TV.
MISCELLANEOUS
46
Check the following guide for the possible cause of a problem before contacting service.
Language Code List
Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle”
and/or “Disc Menu” (See page 32).
and/or “Disc Menu” (See page 32).