Thermador Wok PCG36 Manuel D’Utilisation
English 1
Safety Instructions
Important Safety Instructions
READ AND SAVE THESE INSTRUCTIONS
APPROVED FOR ALL RESIDENTIAL APPLIANCES
FOR RESIDENTIAL USE ONLY
IMPORTANT: Save these Instructions for the Local Gas
Inspector’s use.
Inspector’s use.
INSTALLER: Please leave these Installation Instructions
with this unit for the owner.
with this unit for the owner.
OWNER: Please retain these instructions for future
reference.
reference.
PLEASE READ ENTIRE INSTRUCTIONS BEFORE
PROCEEDING
PROCEEDING
IMPORTANT:
Local codes vary. Installer is responsible for ensuring that
the installation, gas connections, and grounding comply
with all applicable codes. Failure to follow appropriate local
codes and regulations may void the warranty.
Local codes vary. Installer is responsible for ensuring that
the installation, gas connections, and grounding comply
with all applicable codes. Failure to follow appropriate local
codes and regulations may void the warranty.
NOTE:
This rangetop is NOT designed for installation in
manufactured (mobile) homes or for installation in
recreational park trailers.
This rangetop is NOT designed for installation in
manufactured (mobile) homes or for installation in
recreational park trailers.
DO NOT install this appliance outdoors.
Data Rating Plate
The data rating plate showing the model and serial
numbers of your rangetop is located on the underside of
the rangetop chassis near the front of the unit (Figure 9 on
page 9). This information is required if customer service is
requested. Before installation, the model and serial
numbers should be entered in the appropriate spaces in
the “BEFORE CALLING FOR SERVICE” section near the
back of the Use and Care Guide. After installation,
accessing the information is difficult.
numbers of your rangetop is located on the underside of
the rangetop chassis near the front of the unit (Figure 9 on
page 9). This information is required if customer service is
requested. Before installation, the model and serial
numbers should be entered in the appropriate spaces in
the “BEFORE CALLING FOR SERVICE” section near the
back of the Use and Care Guide. After installation,
accessing the information is difficult.
WARNING:
Improper installation, adjustment, alteration, service or
maintenance can cause injury or property damage.
Refer to this manual. For assistance or additional
information consult a qualified installer, service agency,
manufacturer (dealer) or the gas supplier.
maintenance can cause injury or property damage.
Refer to this manual. For assistance or additional
information consult a qualified installer, service agency,
manufacturer (dealer) or the gas supplier.
WARNING:
If the information in this manual is not followed
exactly, a fire or explosion may result causing
property damage, personal injury or death.
exactly, a fire or explosion may result causing
property damage, personal injury or death.
— Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any other
appliance.
appliance.
— WHAT TO DO IF YOU SMELL GAS
•
Do not try to light any appliance.
•
Do not touch any electrical switch.
•
Do not use any phone in your building.
•
Immediately call your gas supplier from a
neighbor’s phone. Follow the gas supplier’s
instructions.
neighbor’s phone. Follow the gas supplier’s
instructions.
•
If you cannot reach your gas supplier, call
the fire department.
the fire department.
— Installation and service must be performed by a
qualified installer, service agency or the gas supplier.
For Massachusetts Installations:
1.
Installation must be performed by a qualified or
licensed contractor, plumber or gas fitter qualified or
licensed by the state, province or region where this
appliance is being installed.
licensed contractor, plumber or gas fitter qualified or
licensed by the state, province or region where this
appliance is being installed.
2.
Shut-off valve must be a “T” handle gas cock.
3.
Flexible gas connector must not be longer than 36”
(914mm).
(914mm).
WARNING:
ELECTRICAL SHOCK HAZARD—
Disconnect power before installing or
servicing. Before turning power ON, be sure
that all controls are in the OFF position.
Failure to do so can result in death or
electrical shock.
Disconnect power before installing or
servicing. Before turning power ON, be sure
that all controls are in the OFF position.
Failure to do so can result in death or
electrical shock.