Thecus Technology IP Storage Server N7700 Manuel D’Utilisation

 

If the R
disk dr

warni
bad sec
possi

eallocated Sector Count or Current Pending Sector of a hard 

ive is not zero, the status of the disk will show “Warning”. This 

ng is only used to alert the system administrator that there are 

tors on the disk, and they should replace those disks as soon as 

ble. 

 

 

From the Storage menu, choose the RAID 
item and the RAID List screen appears.  

 
This screen lists the RAID volumes currently 

residing on the N7700. From this screen, 
you can get information about the status of 

your RAID volumes, as well as the 
capacities allocated for data, USB target, 

and iSCSI. There is also a graph which 
represents how the RAID volume is 
currently allocated. 

 
To configure your RAID settings, press the 

RAID Config button to go to the RAID 
Configuration screen. 

 

Item Description 
Select 

Used to select the current RAID volume. 

Master RAID 

The RAID volume currently designated as the Master RAID 

volume. 

ID 

ID of the current RAID volume.  

RAID Level 

Shows the current RAID configuration. 

Status 

Indicates status of the RAID. Can read either Healthy, 
Degraded, or Damaged. 

Disks Used 

Hard disks used to form the current RAID volume. 

Total Capacity 

Total capacity of the current RAID. 

Data Capacity 

Indicates the used capacity and total capacity used by user 
data. 

USB Capacity 

Indicates the capacity allocated to USB target mode. 

iSCSI Capacity 

Indicates the capacity allocated to iSCSI. 

RAID Config 

Press this to configure RAID volumes. 

Space Allocation 

Press this to adjust the space allocated for data, USB target 
mode, and iSCSI. 

On the RAID List screen, press the RAID 

Config button to go to the RAID 
Configuration screen. In addition to RAID disk 

information and status, this screen lets you 
make RAID configuration settings.  

 
For more information on RAID, see 

. 

 
 

 
 

 
 

 

 
 

29