Thecus Technology IP Storage Server N7700 Manuel D’Utilisation
WARNING
Resetting to factory defaults will not erase the data
disks, but WILL revert all the settings to the factor
disks, but WILL revert all the settings to the factor
stored in the hard
y default values.
Upgrading System Firmware
From the System menu, choose the
Firmware Upgrade item and the
Firmware Upgrade screen appears.
Firmware Upgrade screen appears.
Follow the steps below to upgrade your
firmware:
1. Use the Browse button to find the
firmware file.
2. Press Apply.
3. The beeper beeps and the Busy LED
blinks until the upgrade is complete.
• The beeper only beeps if it is enabled in the System Notification
menu.
NOTE
• Check Thecus website for the latest firmware release and release
notes.
WARNING
Do NOT turn off the system during the firmware upgrade process. This
will lead to a catastrophic result that may render the system inoperable.
will lead to a catastrophic result that may render the system inoperable.
Change Administrator Password
From the System menu, choose the
Administrator Password item and the
Administrator Password item and the
Change Administrator Password screen
appears. Enter a new password in the New
appears. Enter a new password in the New
Password box and confirm your new
password in the Confirm Password box.
password in the Confirm Password box.
Press Apply to confirm password changes.
See the following table for a detailed
description of each item.
See the following table for a detailed
description of each item.
Change Administrator Password
Item Description
New Password
New Password
Type in a new administrator password.
Confirm Password
Type the new password again to confirm.
Apply
Press this to save your changes.
58