Telit Wireless Solutions GE863 Manuel D’Utilisation
GE863-GPS Software User Guide
1vv0300724 Rev. 2 - 24/01/07
2.7.3.2 Hang up the data call
• Send command
ATH<cr>
• wait for response
NO CARRIER
TIP: during the data call the device remains in data (on line) mode, so the escape sequence
(+++) must be issued before sending AT commands to the device.
(+++) must be issued before sending AT commands to the device.
2.8 Answer an incoming Call
When an incoming call is detected the device reports an unsolicited code which may be:
Unsolicited code
Reason
RING
The extended format of incoming call indication is
disabled and a call (voice or data) is incoming.
disabled and a call (voice or data) is incoming.
+CRING: VOICE
The extended format of incoming call indication is
enabled and a voice call is incoming.
enabled and a voice call is incoming.
+CRING: ASYNC
The extended format of incoming call indication is
enabled and an asynchronous transparent data call
is incoming.
enabled and an asynchronous transparent data call
is incoming.
+CRING: REL ASYNC
The extended format of incoming call indication is
enabled and an asynchronous reliable (not
transparent) data call is incoming.
enabled and an asynchronous reliable (not
transparent) data call is incoming.
+CRING: SYNC
The extended format of incoming call indication is
enabled and a synchronous transparent data call is
incoming.
enabled and a synchronous transparent data call is
incoming.
+CRING: REL SYNC
The extended format of incoming call indication is
enabled and a synchronous reliable (not
transparent) data call is incoming.
enabled and a synchronous reliable (not
transparent) data call is incoming.
+CRING: FAX
The extended format of incoming call indication is
enabled and a fax call is incoming.
enabled and a fax call is incoming.
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 28 of 109