Telit Wireless Solutions GE863 Manuel D’Utilisation

 
 
 
 

 
 

GE863-GPS Software User Guide 

 1vv0300724  Rev. 2 - 24/01/07    

  

For example: 
1- Let's assume you want to eliminate all the unsolicited codes that may be sent when receiving SMS 
& Status Report: 
command: 
AT+CNMI= 0,0,0,0,0<cr> 
response: 
OK 

 

For example about a new message indication: 
1- Let's assume you receive a new SMS delivery (AT+CNMI=1,1,0,0,0) and this new message is 
stored on the SIM "SM" storage at the location number 7; the unsolicited code you will receive (if code 
is enabled) is: 
unsolicited code: 
+CMTI: "SM",7 

 

2- Let's assume you receive a new SMS Status Report delivery (AT+CNMI=1,0,0,2,0) and this new 
message is stored on the SIM "SM" storage at the location number 8; the unsolicited code you will 
receive is: 
unsolicited code: 
+CDSI: "SM",8 
 

3.5.1.5   Set Text Mode Parameters (only in TEXT mode) 

 
When the device is set to operate with Text SMS not with PDU, the SMS parameters that usually 
reside on the header of the PDU must be set apart with the command +CSMP. 
The parameters to be set are: 
• 

• 
• 

• 

Message 

Format 

Validity 

Period 

Protocol 

Identifier 

Data Coding Scheme 

The meaning and format of the parameters is: 
 
- Message format, like defined for the first octet of message according to GSM 3.40: 

The format is an 8-bit parameter divided into 6 fields and then reported as an integer: 
 

 
where 
MTI  message type parameter: 

0 1 - SMS Submit (only value supported) 

 
RD reject duplicates parameter 

0 - don't reject duplicates SMS in SC 
1 - reject duplicates on SC 

 

Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved 

 

page 59 of 109