Teka CPX15/CP 15/CP 21/CP 29 Manuel D’Utilisation

 

 

35

 

 
Cleaning is the only maintenance action that is 
required normally. 
Warning! Cleaning must be done with the 
crockery warmer disconnected from the 
electrical power supply. Remove the plug from 
the power socket or disconnect the crockery 
warmer power supply circuit. 
Do not use aggressive or abrasive cleaning 
products, abrasive sponges or pointed 
objects since stains or abrasion marks may 
appear. 
Do not use high pressure or steam jet 
cleaning appliances. 

The crockery warmer can be cleaned using just a 
damp cloth.  If it is very dirty, add a few drops of 
washing-up liquid to the washing water.  
Wipe the surfaces dry using a dry cloth. 
For stainless steel fronted crockery warmers,  
special products for treatment of stainless steel 
surfaces can be used. These products prevent 
the surfaces becoming dirty again for some time. 
Apply a thin layer of such a product on the 
surface using a soft cloth. 
On aluminium fronted crockery warmers use a 
gentle glass cleaning product and a soft cloth that 
does not release fluff. Wipe horizontally without 
pressing on the surface since aluminium is 
sensitive to scratches and cuts. 

Clean the inside of the crockery warmer regularly 
using a damp cloth. If it is very dirty add a few 
drops of washing-up liquid to the washing water.  
Wipe the surfaces dry using a dry cloth. 
Avoid water entering through the air circulation 
opening. 
Only use the crockery warmer again when it is 
completely dry. 

The non-slip surface mat can be removed to 
facilitate cleaning of the drawer. 
The mat can be cleaned by hand using hot water 
with a few drops of washing-up liquid. 
Dry thoroughly. 
The non-slip mat should only be replaced when it 
is completely dry.