Technics ST-C700 Mode D’Emploi
17
Using PC, etc.
You can connect the digital audio input terminal [PC] and a
PC, etc. with a USB cable and play back music on the PC,
etc. with this unit.
PC, etc. with a USB cable and play back music on the PC,
etc. with this unit.
≥ About supported format, refer to “File format” (> 29)
(as of November 2014)
1
Disconnect the AC power supply cord.
2
Connect this unit and a PC, etc.
3
Connect the AC power supply cord to this
unit, and raise the power switch lever to the
[Í/I] position. (> 10)
unit, and raise the power switch lever to the
[Í/I] position. (> 10)
4
Press [NWP].
5
Press [N INPUT O] below [NWP] repeatedly
to select “PC”.
to select “PC”.
6
Operate the PC, etc. for playback.
Connecting to a PC
Before connecting to a PC, follow the steps below.
≥ Refer to the following for the recommend OS versions for your
PC:
– Windows Vista, Windows 7, Windows 8, Windows 8.1
– OS X 10.7, 10.8, 10.9, 10.10
– Windows Vista, Windows 7, Windows 8, Windows 8.1
– OS X 10.7, 10.8, 10.9, 10.10
1 Download and install the dedicated driver to the PC.
(Only for Windows OS)
Download and install the driver from the website below.
www.technics.com/support/
www.technics.com/support/
2 Download and install the dedicated app “Technics
Audio Player” (free of charge) on your PC. (Common
to both Windows OS and OS X)
to both Windows OS and OS X)
Download and install the app from the website below.
www.technics.com/support/
www.technics.com/support/
Listening to audio from a PC,
etc.
etc.
USB
USB 2.0 cable
(not supplied)
(not supplied)
This unit
(rear)
e.g.,
PC, etc.
Type A
Type B
ST-C700-SQT0495_PP_mst.book 17 ページ 2015年1月7日 水曜日 午前10時36分