Technicolor - Thomson HP 270 Manuel D’Utilisation

 EN

Perform steps 1 through 4 on pg. 35.

Press + or – to select “SELECT” and press SET/
SELECT. Selection is complete. The DPOF Index
Screen appears.

Press + or – to move the green frame to the image
you wish to print and press SET/SELECT.

Select the number of prints by pressing + to increase
the number, or – to decrease the number and press
SET/SELECT.
Repeat steps 3 and 4 for the desired number of
prints.
•The number of prints can be set up to 15.
•To correct the number of prints, select the image

again and change the number.

Press + to select “EXIT” and press SET/SELECT.
Selection is complete. The Confirmation Screen
appears.

Press + or – to select “EXECUTE” and press SET/
SELECT. The normal playback screen appears.
•To cancel selection, press + or – to select “CAN-

CEL” and press SET/SELECT.

.... select “RESET” in step 5 on pg. 35. The number of

prints is reset to 0 for all still images.

●

If you load a memory card already set as shown above
in a printer compatible with DPOF, it will make prints
of the selected still images automatically.

●

To print images recorded on a tape, first dub them to a
memory card (

 pg. 59).

While performing the above, never disconnect power,
as this may cause the memory to be corrupted.