Technicolor - Thomson HP 270 Manuel D’Utilisation

EN

Following the illustration, connect the camcorder and
the VCR. Also refer to pg. 23 and 24.

Set the VIDEO/MEMORY Switch to “VIDEO”, then
set the camcorder’s Power Switch to “

” while

pressing down the Lock Button located on the
switch, turn on the VCR’s power, and insert the
appropriate cassettes in the camcorder and the VCR.

Engage the VCR’s AUX and Record-Pause modes.

Engage the camcorder’s Play mode to find a spot just
before the edit-in point. Once it is reached, press
4

/6 on the camcorder.

Press 4/6 on the camcorder and engage the VCR’s
Record mode.

Engage the VCR’s Record-Pause mode and press
4

/6 on the camcorder.

Repeat steps 4 through 6 for additional editing, then
stop the VCR and camcorder when finished.

●

墌 

●

As the camcorder starts to play your footage it will

appear on your TV. This will confirm the connections

and the AUX channel for dubbing purposes.

●

Before you start dubbing, make sure that the indica-

tions do not appear on the connected TV. If they do,

they are being recorded onto the new tape.

•Date/Time

.... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in

the Menu Screen (

墌 pg. 43, 44).

•Time Code

.... set “TIME CODE” to “ON” or “OFF” in the Menu

Screen (

墌

 

pg. 43, 44).

•Playback Sound Mode, Tape Speed And Tape Running

Displays

.... set “ON SCREEN” to “LCD” or “LCD/TV” in the

Menu Screen (

墌 pg. 43, 44). Or, press DISPLAY

on the remote control.

●

You can use Playback Zoom (

墌

 pg. 63) or Playback

Special Effects (

墌

 pg. 64) in step 5.

* Connect when an S-Video cable is not used.

Cable Adapter
(optional)
If your VCR has a
SCART connector, use
the optional cable
adapter.